Page 571 - Buy Premium Tools ATORN Catalogue

Deburring and cleaning
Millinf bits

HSS milling bit
Shank diameter 6 mm

Application: ƒ Toothing 2: rough, with chip breaker groove
For deburring, chamfering, milling, contour milling, fettling and for welding seam ƒ Toothing 3: medium, with chip breaker groove
machining.
Notes:
Execution: Type designation with A... = without serration
ƒ Toothing 1: very rough, without chip breaker groove

Toothing 1: very rough, without chip Toothing 2: rough, with chip breaker Toothing 3: medium, with chip breaker Ident. No. 361–363
breaker groove groove groove
Cutting speed: 200–300 m/min Cutting speed: 150–300 m/min Cutting speed 60-180 m/min
Application: Aluminium (long-chipping), Application: Light metal (short-chip- Application: Steel and steel cast, al-
light metal alloys, lead, tin, plastic ma- ping), brass, copper, electrolyte, red loyed and non-alloyed
terials (thermoplastics and duroplas- cast, bronze, zinc, magnesium alloy
tics) fibre, rubber, wood

Ident. No. 292–293 Ident. No. 222–223 Ident. No. 226 Ident. No. 231–233

Ident. No. 241–243 Ident. No. 251–253 Ident. No. 181–183 Ident. No. 272–273

Ident. No. 302–303 Ident. No. 351–353 Ident. No. 152–153 Ident. No. 192–193

chemicals
Abrasives and
Ident. No. 311–313 Ident. No. 262–263 Ident. No. 171–173 Ident. No. 321–323

Ident. No. 112–113 Ident. No. 161–163 Ident. No. 331–333 Ident. No. 341–343

www.buypremiumtools.com 571