Page 13 - Multi Mfg Catalog 09-12-2020

SPV‐HP Wall Sleeves

Part Wall thickness
A B C
Number Fits Minimum Maximum
9SPV 5" 8" 9 16.5 25.5
912SPV 5" 8" 9 16.5 25.5
WS1‐58 12SPV 5" 8" 9 16.5 25.5
18SPV 5" 8" 9 16.5 25.5
1824SPV 5" 8" 9 16.5 25.5
25SPV 5" 8" 9 22.7 31.7
WS2‐58
3036SPV 5" 8" 9 22.7 31.7
9SPV 8" 12" 13 16.5 29.5
912SPV 8" 12" 13 16.5 29.5
WS1‐812 12SPV 8" 12" 13 16.5 29.5
18SPV 8" 12" 13 16.5 29.5
1824SPV 8" 12" 13 16.5 29.5
25SPV 8" 12" 13 22.7 35.7
WS2‐812
3036SPV 8" 12" 13 22.7 35.7
9SPV 12" 15" 16 16.5 32.5
912SPV 12" 15" 16 16.5 32.5
WS1‐1215 12SPV 12" 15" 16 16.5 32.5
18SPV 12" 15" 16 16.5 32.5
1824SPV 12" 15" 16 16.5 32.5
25SPV 12" 15" 16 22.7 38.7
WS2‐1215
3036SPV 12" 15" 16 22.7 38.7
9SPV 15" 20" 21 16.5 37.5
912SPV 15" 20" 21 16.5 37.5
WS1‐1520 12SPV 15" 20" 21 16.5 37.5
18SPV 15" 20" 21 16.5 37.5
1824SPV 15" 20" 21 16.5 37.5
25SPV 15" 20" 21 22.7 43.7
WS2‐1520
3036SPV 15" 20" 21 22.7 43.7
Wall sleeves can be used in either side or rear install application.

Item Weight The WS wall sleeve has a built in condensate drain pan. A 3/4" female pipe
WS1‐58 48 thread connection is provided in the bottom of the wall sleeve for field
WS2‐58 86 connection to a condensate riser. If the primary condensate drain becomes
WS1‐812 51 clogged, and the condensate drain overflows, water will flow toward the
WS2‐812 90 front of the sleeve to the exterior of the building.
WS1‐1215 54
WS2‐1215 93 Standard WS wall sleeve features
WS1‐1520 58 • Heavy duty leveling legs with locking nuts
WS2‐1520 98 • Powder coated paint finish
• Foil face rubber insulation lining
• Pre‐drilled holes on sides, for mounting to inside frame opening

Multi Manufacturing LLC 2480 Grand Ave., Vista, CA 92081 Ph 760‐670‐3005 Fax 760‐670‐3307 www.multimfg‐usa.com
2