Page 23 - C:\SAME\OneDrive - S.A.M.E. Water\Documents\Flip PDF Professional\2020 Catalouge Mail-compressed\

FRONT RAKE SCREEN Performance & Speci cations

IBUFS (ULTRA FINE) IBUFS Screen - Estimated Flow Rates

• We manufacture to suit non-standard openings
• All dimensions in mm
SCREENING EQUIPMENT
Description • Theoretical capacities
• Table data subject to change to suit civil and ow conditions

The Ultra-Fine Incline Bar Screen is used for ‘ultra- ne screening’ where the removal of waste
material from 0.5mm up to 4mm in size is required in water and wastewater treatment.
The screenings are collected against a wedge wire screen eld and the waste is removed by means
of a multiple brush or rubber insertion rake system. The rakes pass over the wedge wire screen- BAR SPACING (E) (liters/sec)
eld and in doing so remove the entrapped screenings waste. The screenings waste is then MODEL
carried by the dual chain driven rake system up the debris plate and discharged at the top back 0.5 1 2 3 ϰ
end of the screen via the scraper system, and is expelled down the discharge chute for further IBUFS400 96 160 240 280 286
processing. IBUFS600 180 300 457 530 544
The screens are tted with a single motor-gearbox drive mechanism. IBUFS800 263 414 673 784 803
As an electrical standard the screens are timer based or as an additional option the screen drive
can be tted with a di erential level system, so that screens can be set to determine the frequency IBUFS1000 277 470 727 889 911
at which the rakes pass over the screen eld. IBUFS1200 352 601 932 1145 1170
Under normal operating conditions the controller (be it a PLC or di erential level controller) IBUFS1400 432 734 1137 1397 1430
ensures that the screen is operated intermittently, based on timers set for raking and standing. IBUFS1500 468 802 1242 1530 1559
Due to minimal maintenance, great reliability and ease of operation, this screen is extremely
popular in water plants wherever there is a diminutive allowance for technical operators. The
sizing of this screen is calculated to suit max Peak Wet Weather Flow. STANDARD
Screening waste discharge is processed to suit further waste removal systems, namely conveyors, CHANNEL CHANNEL INSTALLED
screw compactors or direct discharge into waste bins. MODEL WIDTH (A) DEPTH (B) DISCHARGE HEIGHT ( C) SCREENING ZONE POWER kW
HEIGHT (D)
IBUFS400 400 800 600 0.55
Application IBUFS600 600 1000 850 0.75
IBUFS800
0.75
800
850
1000
IBUFS1000 1000 1200 1000 1.1
IBUFS1200 1200 1200 1000 1.1
Wastewater treatment plants
IBUFS1400 1400 1500 1200 1.5
Water treatment plants IBUFS1500 1500 1500 1200 2.2 $
Irrigation systems
Sludge plants
Food & Beverage 'ULYH 8QLW
Mining industry
Abattoirs

Features & Bene ts

6FUHHQLQJV
Four or more cleaning rakes
speci c materials of construction to suit the application: 3CR12, 304SS, 316SS
Inclined at 50°-60° to the horizontal (
Chain Technical Features:
• Lower chain guide with no moving part • Modular design & )ORZ
• High tensile strength due to thick links and pins • Low wear due to roller elements )ORZ
• Hardened duplex S/S pins with S/S links and hubs & % '
Removable covers for ease of maintenance &
No lower bearing or sprocket submerged below water level 7DSSHU %DU
Recessed side frame to remove chain from ow path 3URILOH
Mechanical torque overload switch which prevents damage to equipment %
$
PAGE 12

www.samewater.co.za $