Page 101 - PBL614 IM/SM500F-EN SM500F ( WIRO)

SM500F
Field mountable paperless recorder 7 Configuration
7.8.3 Digital Input Configuration
􏰺􏰤 Note. This parameter is displayed only if 'Input type' on the 'Analog I/P' tab (see page 96) is set to 'Volt free digital input'*. If this parameter is changed to anything other than 'Volt free digital input', the input channel reverts to an analog input channel – see page 96.
* 24V Digital i/P
Enter the tag to be displayed on channel indicators when the digital signal is active (6 characters max.).
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear truncated in some Operator views. In such cases, use lower case letters or fewer characters.
Enter the tag to be displayed on channel indicators when the digital signal is inactive (6 characters max.).
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear truncated in some Operator views. In such cases, use lower case letters or fewer characters.
Enter the tag name to be displayed in the Chart and Indicator views and used to identify the channel in archive files (16 characters max.).
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear truncated in some Operator views. In such cases, use lower case letters or fewer characters.
Note. The 'Digital I/P' tab is displayed only if 'Source ID' for the Recording Channel is set to a digital signal source – see Section 7.8.1, page 93.
•1 If this parameter is changed, internally recorded data files are recreated and unarchived data is lost. IM/SM500F Rev. AA 99