Page 48 - Tensionmeter Catalog 2018
P. 48
D Stationary, electronic S C H M I D T
Online-Measuring Systems
c o n t r o l i n s t r u m e n t s
Continuous measurement
Online Tension Measuring Systems and data logging
Depending on the application, SCHMIDT online tension sensors
can be supplied on it`s own or as part of a complete system:
A Tension System B Complete Tension System C Tension System
3-Roller Sensor only 3-Roller Sensor only 1-Roller Sensor only
For use with customer supplied Sensor and display unit provide Replacing an existing
indicators and closed loop continuous tension readings reversing point
control units The analog output signal External amplifier with
or can be used for recording and analog outputs
Customer must supply regulated control purposes Available with guide roller
DC power source Customer Signal Processing: Customer Signal
Customer Signal Processing: for example closed loop control Processing:
for example closed loop control for example closed
loop control
Analog output
0 - 1 V DC
0001...0010
0100...1000 (standard) Analog output
0001...0010 0 - 10 V, 4 - 20 mA, 0 - 10 V DC Analog output
mV / V (optional) (standard) 0 - 1 V DC (standard)
Digital output 0 - 10 V DC, 4 - 20 mA or
RS 232, RS 422, mV / V (optional)
USB or Wi-Fi Digital output 0001...0010
(optional) RS 232 or RS 422 0100...1000 0001...0010 Digital output
(optional) 0001...0010 0100...1000 RS 232, RS 422,
0001...0010 USB or Wi-Fi (optional)
We provide the best solution. Please
contact our technical department
to discuss your applications.
1 st ® SCHMIDT Online Sensors and Indicators:
IN TENSION
METERS
For the continuous measurement of the running line tensions
WORLDWIDE
of threads and yarns, wires, cables, optic and carbon fibers
and similar materials, SCHMIDT offers a wide variety of
Software (optional equipment): sensors using different guide rollers and frontplate dimensions.
»Tension Inspect 3« (WIN XP and Measuring principle 3-Roller Tension System:
higher) Main Features: 3-roller measuring system, consisting of two outer guide rollers
The series TS and FS can be used for and a middle measuring roller. The tension of the measured
continuous tension monitoring. The Real time tension material slightly deflects the measuring roller.
sensor can be connected using RS 232, display (tension and time) This deflection (up to 0.5 mm) is measured by a load cell.
RS 422, USB or Wi-Fi to a PC. Long time recording The built-in amplifier then generates an analog output signal
using operator set
The readings of max. 24 sensors can be Adjustable sampling rate which is proportional to the measured tension.
Subject to change without notice. (see page C 9) of all stored data sensor builds a force triangle. The entry and exit angle must
time span
transferred as real time values to a PC,
Measuring principle 1-Roller Tension System:
displayed and stored as a CSV file using
the program »Tension Inspect 3«.
In combination with 2 outer reference guiding points the
Analyzing and printing
with time (graphs and
be constant. The sensor uses strain gauges and supplies an
numeric report)
output signal in V or mV.
SCHMIDT · ALL OVER THE TECHNICAL WORLD
D 1 www.hans-schmidt.com