Page 50 - Tensionmeter Catalog 2018
P. 50
D Stationary, electronic S C H M I D T
TS Series
c o n t r o l i n s t r u m e n t s
Special tension sensors with ceramic pins Tension sensor - single roller system - for
for yarns and fibers at high speed installation at an existing deviating pully
Model TSP Model TSR For thin wires
4 Tension ranges from 0 - 50 cN 5 Tension ranges from 0 - 10 N and ropes
to 0 - 500 cN 6000 m /min to 0 - 200 N
For line speeds up to v max.
Model TSP-500
Model TSR-10N
Special features: Special features:
Non-rotating, exchangeable ceramic pins Entry angle and exit angle αmin 20° (must be constant)
Suitable only for yarns and fibers Apart from that the instrument relates to model TS1
SCHMIDT Calibration**
Apart from that the instrument relates to model TS1 Available Models Nominal
with running filament
Tension Ranges Width* approx. 300 m / min N
Available Models Measuring Head MODEL Load (FN)
MODEL cN mm TSR-10N 0 - 10
0 - 20
TSR-20N
TSP-50 0 - 50 64 PA: 0.12 mm Ø TSR-50N 0 - 50
TSP-100 0 - 100 64 PA: 0.12 mm Ø TSR-100N 0 - 100
TSP-200 0 - 200 64 PA: 0.12 mm Ø TSR-200N 0 - 200
TSP-500 0 - 500 64 PA: 0.20 mm Ø
Other tension ranges and measuring head widths available on request. Guide Rollers Roller Diameter
Other units of measure available, such as g. Line Speed see page E
* Outside dimensions of front plate v max. ... m / min Roller Material
** Suitable for 95 % of applications (see also chart on page 11) V-grooved mm
PA = Polyamide Monofilament
Standard 4000 30 Hardened steel
Line Speed Pin Material Code F 4000 70 Hard-coated aluminium
v max. ... m / min
Guide Pins see page E Code R1 4000 30 Hard-chrome plated steel
30
2000
Hardened steel
Code B6
Standard 6000 Aluminium-oxide ceramic 5.2 mm Ø Code FB 4000 70 Tempered steel
Code B10 2000 30 Hardened steel
1 st ® F Z α F Z For determine the tension range, please
IN TENSION
send us the following information:
α
METERS
Subject to change without notice. Output Signal Power Supply Specifications Models TSP and TSR same as Model TS 1 (see page D 2 and D 14)
• Line tension Fz
WORLDWIDE
• In- and outcoming angle α
• Mounting position
• Desired guide roller
Special calibration using customer supplied samples is available:
F N
Please supply a sample of at least 5 m in length.
• Application
SCHMIDT · ALL OVER THE TECHNICAL WORLD
D 3 www.hans-schmidt.com