Page 12 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05

Arched Vinyl-Coated Drip Edge

Description:
The Arched Vinyl-Coated Drip Edge provides a smooth
finish that is an aesthetically-pleasing alternative to
traditional piecing. Vinyl-coated roof flange enables
welding a separate skirt to both the flange and the
installed roof membrane to provide a watertight seal.
 Made in 5’ to 10’ lengths depending on building’s
arch specifications.
 Edges are pre-notched for overlapped joints.

 Profiles can be custom-fabricated to meet most
specifications.
 Hemmed drip kick to receive splice cleats.
Energy Efficiency:
®
®
LEED and ENERGY STAR compliant.

Installation:

1. A wood nailer is required if 1” or greater of
insulation is used.

2. This nailer should be attached to the wall in
accordance with ANSI/SPRI ES-1 3.9.

®
3. Install in accordance with EXCEPTIONAL
Metals Details #6010 and #6040.

4. Any deviation from the requirements set forth in
detail drawings must be pre-approved, in writing,
by the EXCEPTIONAL Metals Technical
Department.
Warranty:
EXCEPTIONAL Metals offers a finish and substrate
warranty. Contact the membrane manufacturer for any
additional warranty that may be offered.

Technical Services: Material Gauge Finish
Stainless Steel 24-gauge N/A
Product samples, detail sheets, color chips, and color Bonderized Steel 24-gauge N/A ®
®
chart are available for your submittal package. For Galvalume 24-gauge Mill or Kynar
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

®
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. LEED is a trademark owned by the U.S. Green Building Council and is used with
permission. ENERGY STAR is a registered mark owned by the U.S. Government. ENERGY STAR is only valid in the United States. “Galvalume” is a registered mark owned by
BIEC International Inc. Revised 11/04/2015