Page 31 - +GF+ PPR Aquasystem Catalogue 2017_Neat

Precautions

UV Rays
To avoid damage from UV Rays, PP-R shall not be
exposed to direct sunlight.

general precautions

Low Temperatures
30°
Plastics can become brittle at low temperature.
60°
0°
Installation shall be performed at temperature
above 0°C. Knocks and impacts shall be avoided at
temperature below -5°C.
We suggest to cut the pipe end of 5 cm.

Threaded Fittings
The threaded fittings are recommended to be
joined with Polytetrafluoroethylene (PTFE) tape.
The thread shall not be over tightened as the
plastic parts may be damage.

Pipes Bending
The minimum bending radius must be equal or
more than 8 times of the pipe diameter. For this
purpose, heat the part which will be bent by using
a industrial heat blower or suitable equipment.
Do not use flame.
WE HIGHLY RECOMMEND TO CONTACT OUR
TECHNICAL SUPPORT FOR ADVICE ON PIPE
BENDING.

| 29