Page 1002 - 2006 HARLEY FLSTCI SERVICE MANUAL

See Figure 6-32. Slip drive belt (2) from transmission
Place a support under rear fork and engine. Remove
6.6 B 8782 D E 6-19
2006 Softail: Drive
pivot shaft and spacer. See 2.26 REAR FORK.

sprocket (1). INSPECTION See 1.15 REAR BELT AND SPROCKETS. Reverse bend must not be less than 10 in. (254 mm). Minimum Diameter Do not crimp, pinch or kink. Do not pry.

4. 5. 8784 8785 Figure 6-31. Proper Drive Belt Handling

sprocket, and chain adjuster as an assembly. See 6.3
PRIMARY A C
Remove primary chain, clutch, engine compensating
6.2 PRIMARY CHAIN-

Remove primary chaincase housing. See
Remove rear wheel. See 2.8 REAR WHEEL.

under Forward bend must not be less than 5 in. (127 mm). Minimum Diameter CAUTION Mishandling drive belt will result in premature failure. For maximum strength, integrity and longevity, avoid over bending (A and B), twisting (C), crimping, pinch-

DRIVE BELT REMOVAL DRIVE COMPONENTS. CHAINCASE HOUSING Do not twist. ing or kinking (D), and prying (E).

HOME 1. 2. 3. CASE. 8781 8783