Page 111 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 111

Continued from Test 3.12 (Part 1 of 3).  Is connector [30] fully mated?  NO  Mate  connector.  6739  Clear DTCs using speedometer self diagnostics. See  3.10 SPEEDOMETER  SELF  DIAGNOSTICS. Confirm proper operation with no check engine











                                            Place red meter lead at Breakout   lead at Breakout Box   cavity 12 (gray).   Go to Test 3.12   lamp.



                                       YES   Box cavity 1 (gray) and black meter   Is battery voltage present?  NO  STOP  (Part 3 of 3).






                                         1


                                                         YES  Move red meter lead to  Breakout Box cavity 2 (gray).  Is battery voltage present?  NO  Remove seat. Check for  voltage at ignition fuse. See   Figure 3-18. Is battery voltage present   on both terminals?  NO  STOP  On carbureted models go  to 4.11 NO SPARK/NO ICM  POWER. On EFI models go  to 5.11 NO ECM POWER.






             Test 3.12 (Part 2 of 3) NO SECURITY LAMP AT KEY ON        YES  Replace TSSM.   Learn password   and perform setup.  6740  YES  Locate and repair open   on gray wire between  ignition fuse and TSSM.  6741  2006 Softail: TSM & TSSM









         HOME                                                                                                                                           3-36
   106   107   108   109   110   111   112   113   114   115   116