Page 1170 - 2006 HARLEY FLSTCI SERVICE MANUAL

1.3 (6.2-6.8 1-3
Place cover adapter on air filter. Align adapter holes to
Tighten three studs to 55-60 in-lbs (6.2-6.8 Nm).
in-lbs

mounting holes to three mounting studs. air filter holes. Fit air filter to backplate aligning three Install fasteners through adapter and air filter into mount- ing studs. Alternately tighten to 55-60 Apply a drop of LOCTITE THREADLOCKER 243 (blue) to threads of air cleaner cover fastener. Install air cleaner cover. Tighten screw to 36-60 in-lbs 2006 FLSTFSE 2 : Maintenance

7. 8. 9. Nm). 10. 11. (4.1-6.8 Nm).
Remove cover fastener (10) and air Remove fasteners (8) holding cover adapter (7) and filter element (6) to backplate (2). Remove air filter. Gently pull both rubber breather plugs (4) from cups in Inspect rubber breather plugs (4) for tears, cuts, holes or NOTE The breather plugs direct crankcase vapor back into the air filter. Recirculating crankcase vapor eliminates the discharge of pollutants from the crankcases. Without breather plugs, or with leaking breather plugs, crankcase vapor vents into the atmosphere in violation of emissions standards. Venting to the atmosphere also causes the breather valve in the cylinder Using a deep sock

AIR FILTER REMOVAL Figure 1-1. cleaner cover (9). backplate. other damage. Replace if required. head cover to flutter. plate with damp cloth to remove dust CLEANING required. INSTALLATION on throttle body side of backplate. bolts. Do not tighten breather bolts now. completely tighten at this time. (13.6-16.3 Nm). into cups on backplate.

HOME See 1. 2. 3. 4. 5. (2). 6. 1. 2. 3. 4. clean. 1. 2. 3. 4. 5. 6.