Page 1172 - 2006 HARLEY FLSTCI SERVICE MANUAL

1.4 2 1-5

3

Clutch master cylinder reservoir Reservoir cover Cover gasket Screws (2) @ 6-8 in-lbs (0.7-0.9 Nm) exceed FILL LEVEL. Tighten reservoir cover screws to 6-8 in-lbs
4 2006 FLSTFSE 2 : Maintenance
1 Figure 1-2. Clutch Master Cylinder Reservoir (typical) Figure 1-3. Fill Level (reservoir cover removed as viewed from front of motorcycle) CAUTION Clutch fluid volume actually increases with clutch wear. If necessary, add D.O.T. 4 BRAKE FLUID, (HD-99953- 99A) to master cylinder reservoir. Fluid level should not Carefully place cover gasket and cover on clutch master cylinder reservoir and secure with two cover screws.

8834 1. 2. 3. 4. 8835 Do NOT overfill reservoir. 5. 6. 7. (0.7-0.9 Nm).

CLUTCH HYDRAULIC CLUTCH The clutch is hydraulically actuated. A hand lever actuated master cylinder creates pressure in a clutch fluid line that activates a secondary clutch actuator mounted in the clutch release cover. The secondary clutch actuator piston extends and contacts a pushrod which releases the clutch. CAUTION D.O.T. 4 hydraulic brake fluid is used in the hydraulic clutch. Do not use other types of fluids as they are not compatible and could cause equipment damage. 1CAUTION Direct contact of D.O.T. 4 brake fluid with eyes can cause irritation. Avoid eye contact. In case of eye contact flush with large amounts of water and get medical attent

HOME (00353a) (00205a) 1. 2. 3. 4.