Page 258 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 258
5-39
Turn ignition switch ON. While wiggling harness, 3 of connector [91A]. Is voltage present at any time? No problem
NO check for voltage at terminal NO found. NO Replace speedometer.
Turn ignition key OFF . While wiggling harness, check for continuity to ground at YES Locate and repair intermittent short YES Locate and repair intermittent short to voltage. 2006 Softail: Engine Management (EFI)
NO terminal 3 of connector [91A]. Is continuity to ground present at any time? to ground. NO Turn ignition switch ON. Check for voltage at terminal 3 of connector [91A]. Is voltage present? YES Locate and repair short to voltage.
Replace ECM. NO Replace TSM/TSSM. Per- form password learn. NO Replace tachometer.
1
NO Reprogram and perform password learn.
Test 5.12 (Part 2 of 2) STARTS, THEN STALLS: DTC U1300, U1301 or Continued from Test 5.12 (Part 1 of 2) Set run/stop switch to RUN. Turn ignition key ON. Is BUS Er present? YES Turn ignition key OFF . Disconnect ECM at connector [78]. Turn ignition key ON. Is BUS Er present? YES Turn ignition key OFF . Disconnect TSM/TSSM at connector [30]. Turn ignition key ON. Is BUS Er present? YES Is vehicle equipped with a tachometer? YES Turn ignition key OFF . Disconnect tachometer at connector [108]. Turn ignition key ON. Is BUS Er present? YES Turn ignition key OFF . Disconnect speedometer at con
HOME “BUS Er” NO
