Page 599 - 2006 HARLEY FLSTCI SERVICE MANUAL

Negative battery terminal Positive battery terminal
1 Figure 1-8. Battery Assembly Insert bolt through battery negative cable (black) into threaded hole of battery negative (-) terminal (2). Tighten Apply a light coat of petroleum jelly or corrosion retardant 11WARNING 1WARNING After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in death

2 3 bolt to 60-96 in-lbs (6.8-10.9 Nm). material to both battery terminals.

Battery or serious injury. (00070a) Install seat.

11811
2.
1.
3.
3. 4. 5.

DISCONNECTION AND REMOVAL

11WARNING 1WARNING Disconnect negative (-) battery cable first. If positive (+) cable should contact ground with negative (-) cable con- nected, the resulting sparks can cause a battery explo- sion, which could result in death or serious injury. See Figure 1-8. Unthread bolt and remove battery nega- tive cable (black) from battery negative (-) terminal (2). Unthread bolt and remove battery positive cable (red) from battery positive (+) terminal (3). INSTALLATION AND CONNECTION See Figure 1-9. Verify that the positive battery cable from the starter (4) is routed next to tab (3) on the battery tray pad (2). Place the fully charged battery i

Remove seat. Lift battery from within oil tank. does not sit on front edge of tray pad. the motorcycle’s electrical system.

HOME (00049a) (00068a) 1-14
1. 2. 3. 4. 1. 2.