Page 780 - 2006 HARLEY FLSTCI SERVICE MANUAL

Place loose seat strap bracket over mounting fas-
assembly through seat strap. On FLSTF models, con-
heard. A secured strap bracket will require force to
Pull up on strap bracket until an audible click is
2.45 s0388x2x 2-131
Attach passenger seat to seat base if removed. Place
2 4 2006 Softail: Chassis

nect sides of loop snap. Insert tang at front of seat into the channel in the frame. Install rear thumbscrew. Install side mounting thumbscrews. Attach seat strap. Tuck any slack material under seat. tener on frame. undo. Sissy Bar: FLSTC Models The FLSTC features a sissy bar upright and pad (1). Remove this assembly only when necessary. Tighten sissy bar fasten- ers to 35-60 in-lbs (4.0-6.8 Nm). 3 3

1. 2. 3. 4. 5. a. b. c. 1

5 Figure 2-162. Seat: FLSTC and FLSTF

SEAT: FLSTF/FLSTC REMOVAL/INSTALLATION 11WARNING 1WARNING After installing seat, pull upward on front of seat to be sure it is in locked position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070a) NOTE Thumbscrew can be unthreaded and threaded using the SEAT MOUNTING SCREW TOOL (HD-47190). See Figure 2-162. Seat attaches with a single thumbscrew on the seat bracket (7) and two thumbscrews on the side (3). Sissy bar upright assembly (FLSTC) Seat (FLSTC) Thumbscrew Seat (FLSTF) Seat strap (FLSTC) Seat strap (FLSTF) Seat bracket 7 6 Loop snap

HOME Seat Install seat as follows. 1. 2. 3. 4. 5. 6. 7. (all models)