Page 784 - 2006 HARLEY FLSTCI SERVICE MANUAL

2.49 If removed, install studs (4) and 1 2 2-135

NOTES On FLSTC models, there are no washers between studs If replacing isolator (9), long (silver) threads face saddle- bag and short (yellow) threads face support. tighten nuts (1) behind fender support (2) to 21-27 ft-lbs Install flange nuts and washers (5) inside saddlebags. Tighten to 120-144 in-lbs (13.6-16.3 Nm). Install lower bracket acorn nut (7) and washer (8). Tighten to 120-144 in-lbs (13.6-16.3 Nm). 3 4 7 9 10 2006 Softail: Chassis

INSTALLATION (4) and sissybar sideplate (3). Figure 2-166. See (28.5-36.6 Nm). 7 8

Figure 2-166. Saddlebags: FLSTC

1.
3.
2.
●
●
5
See Figure 2-166. Remove acorn nut (7) and washer (8)
Lift saddlebag away from motorcycle. Remove nuts (1)
Remove flange nuts and washers (5) from inside saddle-
SADDLEBAGS: FLSTC

6

REMOVAL from lower support. bag. and studs (4) if necessary. Nut Fender support Sissy bar sideplate Stud Flange nut and washer Saddlebag Acorn nut Washer Isolator Lower front support

HOME 1. 2. 3. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. s0522x2x