Page 923 - 2006 HARLEY FLSTCI SERVICE MANUAL

2

1 1 4
1 3

2 Figure 3-194. Positive Battery Cable Figure 3-195. Battery Tray Hole
Fuse block bolts Battery tray pad Positive battery cable Battery tray pad Connection to starter
3 Positive battery terminal

7941 s0256x1x Tab
1. 2. 3. 1. 2. 3. 4.

Slide oil tank into position within frame. Install two bolts and washers (22) through top Install two screws and washers (26) from back side of Install new clamp (7) to attach oil feed hose (8). Position drain hose outboard of the electrical panel and inboard of the brake line and frame harness. Attach drain Install the two bolts which attach the electrical panel to Install two bolts (1) to attach fuse Place rubber battery tray (2) inside oil tank. Route posi- tive battery cable (3) through hole in tray as shown in See Figure 3-187. Connect vent and return lines to tank. No tools are necessary for this step. Insert lines straight into fitting

INSTALLATION Figure 3-189. bracket (21) to hold tank in place. tank. Secure with flange nuts (27). hose clamp (2) to frame. the frame. Figure 3-194. block bracket. Figure 3-195. mount over frame tab. SYSTEM: FXSTD/FLSTF, or serious injury. (00070a) Install seat. 2006 Softail: Engine

HOME See 1. 2. 3. 4. 5. See 6. 7. 8. 9. 10. priate. (00068a) 11. 12. 13. 3-136