Page 184 - 2107 N Rough Creek Builder Binder for Owner.pdf

GETTING STARTED

1 Review all of the instruc ons kits with compression fittings
before you begin work.
Improper installa on can (Figure 1). Compression fittings
damage the water heater, your home are easier to install than sol-
and other property, and can present dering copper pipes.
risks of serious injury or death.
Figure 1 - Flexible connectors use compres-
sion fittings and do not require soldering. 2 Check with your local and pound approved for potable water
GETTING STARTED Figure 2 - Use a non-contact circuit tester your area. In the absence of local and wire strippers)
state authori es for any local
or state codes that apply to
tions (for example, screwdrivers,

state codes, follow Na onal Fire
Protec on Associa on (NFPA-70) and
for power (Figure 2)
the current edi ons of the Na onal
to insure that the power is off before you
Electric Code (NEC) and the Interna-
work on a circuit.
onal Plumbing Code (IPC). The
instruc ons in this manual comply with
na onal codes, but the installer is
Figure 6 on page
responsible for complying with local Recommended Accessories:
codes. 8)

Massachuse s code requires this wa-
ter heater to be installed in accordance off device
with Massachuse s 248-CMR 2.00 and
248-CMR 5.00: State Plumbing Code. on page 6)
Other local and state authori es may
Figure 3 - Install a Pressure Reducing Valve have similar requirements or other
set to 50 to 60 PSI.
codes applicable to the installa on of on page 7)
this water heater.
Before you start, be sure you Valves (Figure 7 on page 8)
3 have, and know how to use, the

following tools and supplies:

priate for the type of water pipes in
your home

the cold and hot water pipes

pipe, use threaded connectors suit-
able for the specific type of plastic
pipe used: CPVC and PEX (cross-
linked polyethylene). Do not use
PVC pipe.

you may purchase connector

al Electric Water Heater Use and Care Guide