Page 46 - B8773-AEW-XX-XX-PP-A-0001_[P1]_Contractors Manual

2.9.4 ‘Make line’ and Slap Table Monitor Shrouds Where the slap table/make line doesn’t back
onto a wall, i.e. a sneeze screen, the monitors
Where the slap table/make line backs onto a should be pole mounted from the ceiling.
wall, the three wall mounted monitors must be
shrouded by black monitor shrouds. Additional
monitors may also be required - refer to drawings.
• The surrounds require installation by the main

contractor. The monitors, brackets, small
power and data points must be installed in
the usual manner, concealed by the shroud
• Sockets, data points, monitor brackets and
the black shroud should be fitted by the
shopfitter BEFORE the computer installation
team arrive
• The tiles inside the shroud should be covered
by BLACK vinyl by the sign contractor.
• ALL sockets and data points inside the
shroud should be BLACK
• There are also angled front faced shrouds,
so angled monitors sit confortably
• The boxes will have two sets of fixing holes to
ensure left and right-handed mounting, so
there is no need to order anything bespoke

Be aware that:
a) the makeline monitor should face towards
the counter
b) the monitor at the makeline - slap table
junction should face away from the makeline
c) the monitor near the front of the slap table
should face towards the makeline

2.9.4 ‘Make line’ and Slap Table Monitor Shrouds 3 February 2016