Page 156 - B6118-AEW-XX-XX-PP-A-0001_(P16)_Contractors Manual

DESIGN

D5 Back of House (Interior)

D5.1 Kitchens

Kitchen equipment layouts will change for all Ceiling
restaurants through the EotF projects. This design 600x600mm Satin Spar concealed grid modular
will be completed by McDonald’s kitchen ceiling with downward tile access.
supplier, H+K International and be coordinated
by the projects Platform Integration (PI) coach. All lighting by LAUK.
Any physical changes to the kitchen space
should be coordinated by the architect. Older restaurants are likely to have 600x600mm
Burgess push in ceiling tiles in a concealed
Specification of finishes may change at a 15mm grid.
restaurant specific level; however the following
should be expected in existing situations: Doors
Solid core with hardwood lippings. Balanced
Floor laminate, polyrey cream to both sides. Vision
150x150mm Bianco a Carbo anti slip tiles from panel required.
Vogue ceramic. 4mm grout joints, anthracite.
Ironmongery
Or 200x200mm Swedecor anti slip tiles, 4mm All ironmongery to SAA or stainless steel including;
grout joint, anthracite. 300mm kick plates, D type pull handle, push
plate, door closer, door stop, 3 sets of hinges.
Installation as specification contained within
Construct section including epoxy grout. Where finishes are to be renewed, agreement
to be obtained from McDonald’s project
150mm ceramic skirting tile for all walls prior to manager for those to be implemented.
wall finishes beginning

Walls
3mm hygienic cladding (tin grey or white – as
specified per project) with all proprietary fixing
strips, covers and coves.

D5.1 Kitchens 5.0 25 July 2017