Page 27 - B8773-AEW-XX-XX-PP-A-0001_[P4]_Contractors Manual

2.3 Skirting Details
Genesis KCS is a flexible PVC capping seal used D R A F T

2.3.1 Front of House Skirting

Skirting in front-of-house areas is to be installed
to provide a constant datum around the
full customer area. Set out with the skirting
top 150mm AFFL at the centre front of the
counter. Contractor should strike a line from the
counter position (150mm AFF) setting constant
skirting head to all other customer walls. The
skirting will be supplied 200mm deep to allow
for scribing to any variations in floor level.

Customer area internal wall skirting’s are to be
finished in 150mm bonded laminated boards on
to MR MDF. Colour black.
Technical Datasheet - Skirting

2.3.2 Back of House Skirting

P.V.C Capping Strip - KCS
As noted in 2.2.2 Back of House Floor Finish, all
back of house skirting will be continuous vinyl
Product Description
cove (as floor vinyl).
Genesis KCS is a flexible PVC capping seal used
to finish the top of a resilient floor covering
Tiled walls to have PVC Capping strip for the vinyl
where it has been coved up the wall.
sheet flooring to be coved into. PVC Capping
Capping seals are usually used in conjunction
with a cover former. strip in black. Code KCS by Genesis, or similar
Technical Datasheet - Skirting
and approved.
Dimensions and Colour
The KCS profile is available in 2m lengths
P.V.C Capping Strip - KCS
OR 20m coils. The profile is 40mm wide
(W) x 2mm deep (D). And in White, Black
Product Description
or Dolphin Grey finishes.
to finish the top of a resilient floor covering
where it has been coved up the wall.
Range Capping seals are usually used in conjunction
with a cover former.
Dimensions and Colour
The KCS profile is available in 2m lengths
OR 20m coils. The profile is 40mm wide
(W) x 2mm deep (D). And in White, Black
or Dolphin Grey finishes.
W Range W D
D
KCS01 KCS02 Daily Installation
W W D
D Brush down the profile using a soft bristled
brush and remove any dust by wiping with a Preparation is essential to a good quality
KCS01 KCS02 Daily Installation installation. Surfaces must be sound, smooth,
Brush down the profile using a soft bristled
damp cloth. Preparation is essential to a good quality
dry, and free from contaminants which will affect
brush and remove any dust by wiping with a installation. Surfaces must be sound, smooth,
To be read in conjunction with counter detail drawings
damp cloth.
Twice Weekly or as Required dry, and free from contaminants which will affect
adhesion. Wall surfaces should be free from any
Twice Weekly or as Required
adhesion. Wall surfaces should be free from any
Technical Details Technical Details Brush down the profile using a soft bristled previous coverings, linings or adhesive residues
Brush down the profile using a soft bristled
previous coverings, linings or adhesive residues
brush with clean, warm water, containing the
2.3.1 - 2.3.2
PVC is particularly suitable for a wide range brush with clean, warm water, containing the 3 February 2016
used to fix them. Paint films and any mould must
Front and Back of House Skirting used to fix them. Paint films and any mould must
correct dilution ratio of a ph neutral cleaning
PVC is particularly suitable for a wide range correct dilution ratio of a ph neutral cleaning
be removed and the affected surface treated
of applications due to its excellent chemical
solution. Then apply a small amount to a wet
correctly. The capping seal should be allowed to
resistance. Genesis profile KCS is a Matt
of applications due to its excellent chemical solution. Then apply a small amount to a wet be removed and the affected surface treated
green scotch pad and gently clean the surface
acclimatise for 24 hours prior to installation at
Grade filled flexible PVC extrusion. The
in a left to right motion. During the cleaning
resistance. Genesis profile KCS is a Matt process, the water must be changed on a an ambient temperature of 18°C. correctly. The capping seal should be allowed to
physical properties of the material in terms
of Mechanical performance, Softness, cold green scotch pad and gently clean the surface
1. Mark the position of the top of the capping
regular basis. Do not soak the profile. Once
Grade filled flexible PVC extrusion. The in a left to right motion. During the cleaning acclimatise for 24 hours prior to installation at
seal on the wall and join together using a
flex and cold bend and Water Absorption
the profile has been cleaned thoroughly rinse
an ambient temperature of 18°C.
chalk line.
are all in accordance with BS2782.
physical properties of the material in terms with fresh, clean water and dry with a dry 2. Apply a proprietary contact adhesive to the
All Genesis PVC profiles are REACH compliant. process, the water must be changed on a
lint free cloth. Stubborn marks such as boot
of Mechanical performance, Softness, cold regular basis. Do not soak the profile. Once 1. Mark the position of the top of the capping
wall and back of the capping seal.
blacking may be removed by rubbing with of a
green scotch pad and neutral detergent. After
flex and cold bend and Water Absorption the profile has been cleaned thoroughly rinse seal on the wall and join together using a
Maintenance
3. Allow the adhesive to become touch dry.
cleaning, dry thoroughly with a lint free cloth.
chalk line.
are all in accordance with BS2782. Due to the physical properties of the PVC 4. Once dry, bring both surfaces together and
Regular maintenance will prevent the buildup
of dirt and grease. Under no circumstances with fresh, clean water and dry with a dry
apply even pressure along the capping seal
should degreasers of any type be used on this material, we strongly recommend that the ensuring any air bubbles are removed and full
profile. Similarly floor cleaners/ sanitizers which lint free cloth. Stubborn marks such as boot
All Genesis PVC profiles are REACH compliant. green pad is changed regularly. On completion contact is made with the wall. 2. Apply a proprietary contact adhesive to the
the profile should be completely dry. The
wall and back of the capping seal.
contain hydrocarbons or citrus based agents blacking may be removed b 5. All internal corners should be mitre cut.
cleaning methods described for the above y rubbing with of a
should not be used. Floor sealants, polishes mentioned products can be used with other External corners may be mitre cut or
Maintenance should not under any circumstances be applied green scotch pad and neutral detergent. After 3. Allow the adhesive to become touch dry.
wrapped around
Genesis products that are PVC.
to PVC, the use of such aggressive detergents
could result in colour fade within the PVC. cleaning, dry thoroughly with a lint free cloth.
Regular maintenance will prevent the buildup Due to the physical properties of the PVC 4. Once dry, bring both surfaces together and
of dirt and grease. Under no circumstances material, we strongly recommend that the apply even pressure along the capping seal
P.V.C. Trim • Stair Nosings • Expansion Joints • Transitions • Seals • Edge Protection • Metal Trim • Skirting • Tools
should degreasers of any type be used on this green pad is changed regularly. On completion ensuring any air bubbles are removed and full
profile. Similarly floor cleaners/ sanitizers which the profile should be completely dry. The contact is made with the wall.
Tel: +44 (0)1642 713000
contain hydrocarbons or citrus based agents cleaning methods described for the above 5. All internal corners should be mitre cut.
Email: info@genesis-gs.com
should not be used. Floor sealants, polishes mentioned products can be used with other External corners may be mitre cut or
www.genesis-gs.com
should not under any circumstances be applied Genesis products that are PVC. wrapped around
UK Head Office & Factory
to PVC, the use of such aggressive detergents
Stokesley Business Park Stokesley
North Yorkshire TS9 5JZ UK
could result in colour fade within the PVC.
P.V.C. Trim • Stair Nosings • Expansion Joints • Transitions • Seals • Edge Protection • Metal Trim • Skirting • Tools
Tel: +44 (0)1642 713000
Email: info@genesis-gs.com
www.genesis-gs.com
UK Head Office & Factory
Stokesley Business Park Stokesley
North Yorkshire TS9 5JZ UK