Page 11 - geneO X

Unpacking the Handpiece
Note: Check that the system and all its components are intact. If you detect any sign of damage or a missing
item, do not continue with the set up. Immediately report this to your Pollogen representative.
Initial Set Up
Follow these steps for simple plug and play set up:
Step 1 – placing the system:
Place the GENEO X main unit on a stable surface which can support the weight of the system, which is about 9Kg (~20 lbs.).
Step 2 – placing the cradles:
The screen mounted cradle Holder (for simplicity “holder”) has round marks on its top panel to indicate cradle positions (identified in Fig. 8). There are three possible positions for a cradle on the Holder. The GENEO X utilizes only the middle and left positions (the left position being the farthest from the attachment point of the holder and the screen frame). The two cradles are identical, non-specific and can fit any of the two positions.
Fig. 8
Hold the Cradle with the opening towards the holder (Fig. 9 and 10A), insert through like a bead and continue sliding it to the right side until it clicks into place. Click one cradle in the middle location and one cradle in the left location, while covering the round mark entirely (Fig. 10B).
Once the cradle is located in its proper place it will be “locked” into position.
Fig. 9
Fig. 10A
Fig. 10B
11