Page 13 - geneO X

Fixate the electrical cords of the handpiece in the grooves of the back panel to keep them sorted and organized as seen in Fig. 12E.
Re-attach the left-side back cover and screw it back to place (Fig. 12F).
Fig. 12F
Have the front of the system facing you and place the OxyGeneo handpiece in the right cradle with tis treatment head facing up. Place the TriPollar RF handpiece in the left cradle with its treatment head facing up, as shown in (Fig. 13).
Note: The handpieces must be connected and locked to the system before it can be activated.
Fig. 13
Step 4 – connecting the power supply:
Choose the appropriate plug adaptor (the system is supplied with an assortment of plug adaptors to be able to fit electrical sockets of different countries) and connect it to the Power Supply. Verify that it is tightly connected.
First, connect the Power Supply to the system through the dedicated jack in the back panel of the main unit, located near the ON/OFF button (fig. 14).
Warning: Before connecting the Power Cord, make sure that the ON/OFF switch is in the OFF position.
Fig. 12E
13