Page 20 - Preview

11. GET TO KNOW THE OXYGENEO APPLICATOR
Attach the OxyPod\Massager to the applicator before commencing session according to the desired treatment:
• OxyPod for oxygenation treatment
• Massager Head for massage
treatment
Both OxyPod and Massager Head will click- into-place against the corresponding hinge in the applicator’s top surface. It vibrates over the treated area where a treatment gel/serum is applied. After cleaning the massager head, reassemble the parts by dressing the plastic mediator with the silicone cover.
For both treatments, vibration Intensity can be adjusted by using the “+” or “–” button on the applicator (during treatment) or through the slider on the screen (before treatment is started or upon session pause following applicator turn-off and “Edit” option pressed on screen). The treatment duration (in minutes) may also be adjusted through the on-screen slider (pre-treatment or via “Edit” option).
Applicator led color is illuminated according to the following sessions: OxyGeneo - Pink, Massage - Red.
NOTE: The applicator must be connected and locked to the system before it can be activated.
APPLICATOR INDICATIONS
Fig. 33
The applicator is in idle mode (it receives minimal power from the system for detection of its connection, but energy is not being delivered and vibrating motor is not running.)
Fig. 34
INDICATIONS
MEANING
Green light on
Green light Blinking
Applicator is in stand-by mode (for example, due to a consecutive press on the applicator’s Start button while the applicator was running) to allow pause in treatment or edit of treatment parameters. Energy is not being delivered and vibrating motor is not running.
Blue light on
Start button was pressed and treatment is in progress – Oxygeneo applicator is active, vibrating motor is activated.
Table 3: Oxygeneo Applicator Indications
NOTE: When operating the system, verify that all led lights are operating.
21