Page 22 - Preview

11. Once the session is finished cleaning the treated area with a damp warm towel.
12. Aftereachtreatment,theOxyPodshouldberemovedanddiscarded,and the applicator cleaned. (For cleaning instruction refer to the “Care and Maintenance” chapter) (Fig. 40).
OxyGeneo treatment is recommended once a week for 6 successive weeks. The treatment course can be repeated according to individual needs.
Fig. 40
14.MASSAGE TREATMENT PROCEDURE
1. Clean and thoroughly dry the skin before treatment.
2. Connect the Massager head to the applicator.
3. Apply serum to the treated area.
4. Select the Massage option in the ‘Manual’ mode or choose one of the treatments from the ‘Treatment’ mode (according to chapters 9 or 10 above respectively). Make sure that the applicator's GREEN LED is ON (fig. 42 or fig. 43).
Fig. 41
Fig. 42-43
5. Optionally adjust the default intensity and duration parameters. The applicator's GREEN LED is blinking to indicate parameters may be adjusted. The default values as well as the minimum and maximum allowable values are shown in table 4 below.
MASSAGE PRE-SET TREATMENT PARAMETERS
|
||
Default
Min
Max
Default
Min
Max
Intensity
4
1
10
6
1
10
Duration
6
2
20
8
2
20
Table 4: Massage Pre-Set Treatment Parameters
23