Page 205 - Gas Detection Systems Training Manual

Just touch the text field for the alarm mode you wish to change, and select the desired mode (above or below) using the popup keypad. You may continue to change the other alarm active mode states as long as you remain on this screen. To cancel the changes, simply return to the “Change Alarm Levels” screen by pressing the “Alarm Levels” button. When you are ready to commit the changes and write them to the SEC 3100 device, simply press the “Commit Changes To 3100” button.
As the changes are written to the 3100, a popup status box appears indicating the process:
Once completed, the “Alarm Active Modes” Screen is re-displayed as it was when first entered before any changes were made; only the new active mode settings will be shown.
Special Note: So far, this manual has described the “Alarm Active Modes” Screen covering all necessary information related to configuration. However; the depicted screen shown relates to SEC 3100 versions earlier than 2.1.0095. Starting in version 2.1.0095, a different set of screens has been added to support Audible Alarm Latch Modes in the SEC 3100 device. The SEC 3500 OI detects the device version and displays the appropriate screens for the feature version of the device. For this screen, what has been described so far is functionally the same, however for device version 2.1.0095 (feature version 6+) and up, the fault alarm may also have its active mode changed instead of hard-coded (as previously shown). This essentially is not very useful, but was added to keep feature-locked with the SEC 3100. The extra alarm selection for Fault Active Mode is shown on the next page:
Sensor Electronics Corporation 5500 Lincoln Drive Minneapolis, Minnesota 55436 September 29th, 2006
Page 21 of 66
952-938-9486
SEC 3500 OI Supervisor Operator’s Manual Version 2.1.0095