Page 214 - Installation Training Binder FIT1-3

Sealing the Liner to the Rack

1. Ensure that the liner is laying flat on the floor all around the rack.

2. If liner is curled use double sided tape along the stanchions to
secure liner into position for acid resistant sealant application.

3. Clean rack and liner at joints using a use damp cloth.

4. Remove any oil or grease from the rack with a non-volatile cleaner.

Cleanliness is required to complete a satisfactory bond

WARNING: Do NOT put any double sided tape or

any other material underneath the liner where
bonding will take place.