Page 432 - Installation Training Binder FIT1-3

Frequently Asked Questions
11/24/15

Q: What application is the Hawk system used for?
A: The Hawk system is used for VRLA Battery Applications.
Q: What is the system made out of?
A: The Hawk system walls are made out of polypropylene.
Q: How is the system bolted to the ground?
A: The Hawk system comes with L brackets, by request, that get bolted to the floor, these are always placed between the
cabinets.
Q: Is the Hawk system less expensive than the Eagle system and the Condor system?
A: Yes. The Hawk system is the least expensive of the above named.
Q: What information is needed in order to size a Hawk system for (a) cabinet(s)?
A: To size a Hawk system correctly, we need to know the cabinet width and depth, the number of cabinets, if the cabinets are
side by side, and if the UPS cabinet is connected to the battery cabinet(s).
Q: There is not very much room under the cabinet(s), do the pillows still get placed in there?
A: Yes. The Hawk system comes with special VRLA pillows, which are 1 inch in thickness and should fit under the cabinet(s).
Q: Can the Hawk system be installed inside the battery cabinet?
A: It is not recommended to install the system within the cabinet because it restricts air flow, however, our application engineers
can review your specific application.
Q: How thick are the Hawk system barrier walls?
A: The barrier walls are 1/2 an inch thick.
Q: If a Hawk system size is LL - WWW, is that the inside or outside dimensions?
A: The system size is the inside dimensions. Because the barrier walls are 1/2 an inch thick, the outside dimensions of your spill
containment would be 1 inch larger: LL + 1 - WWW + 1.
Q: Can the Hawk walls be made in a different color?
A: Yes, grey walls are available upon request. These walls may be subject to an additional cost and extended lead time.

Raven Spill Containment Q&A
Q: Can the Raven system be custom fit to any battery tray?
A: Yes. The Raven system should be sized exactly to the tray as every manufacturer’s tray is different.
Q: Is the Raven UL Listed?
A: No. The Raven system is not UL Listed but it is made with the same material process as our UL Listed spill containment.
Q: What application is the Raven system used for?
A: The Raven is used for battery tray applications.
Q: Do I need to have the exact dimensions of the battery tray?
A: Yes. We recommend that a drawing of the actual battery tray is provided to ensure that we quote the correct size.

Enviro-Tray Spill Containment Q&A
Q: Can the Enviro-Tray be custom fit for a battery rack?
A: No. The size of the Enviro-Trays is not customizable but, they can be configured to fit most applications.
Q: Are the Enviro-Trays UL Listed?
A: The Enviro-Trays have been tested by UL for flammability and meet UL 94V-O.
Q: How do the Enviro-Trays connect?
A: The Enviro-Trays interlock to connect.
Q: What size are each modular tray?
A: Each EnviorTray is 12”x12” and holds a single 12”x12” neutralizing and absorbent pillow (VRLAPAD)

UL Certificate Q&A