Page 13 - 2017PL

®
®
Corian® & Apollo® sinks (includes basket waste strainer)
Sink/Hob Mountings & Cutouts
Sink undermount £90
Belfast Sink cut out (inc. drip groove) £148
Drainers (type)
£62 B (1-5mm gradient) £62 C (1-5mm gradient) £62 £128 E (3mm flat) £128 F (flat with 3mm recess) £128
Sink overmount £78
Hob Cut-Out (including insulation tape)†† £104
Bowl/Sink Inlay (per metre) £43
A (1-5mm gradient)
D (3mm flat)
Undermounted Sinks available in Bone, Cameo White, glacier White & vanilla
802 £402 859 £586
804 £571 871 £886
805 £631 873 £1019
809 £419 881 £970
850 £875 965° £543
857 £298 966° £708
967° £425 969° £560 970° £673
R0 (square corners) prices available on request (Rosemary is only available in R0) ° 965, 966, 967, 969 & 970 sinks are now also available in Designer White
(waste disposal units must be supported by a cradle)
Apollo® Urban Sinks R10s
Cat No. Description
Length
Width
Depth Price
U851s Single Bowl U853s Half Bowl
U871s Large Single Bowl U752s One & Half Bowl
317mm
413mm
175mm £713 150mm £575 210mm £804 175mm
M813 £1,565 M871 £1,652 M451 £2,104
810 £309
Trevino Bowls available in all Corian® colours
Oval Bowl
Round 400 Bowl
Round 250 Bowl
Vivari® Sit on Sinks & Bowls
contact sales@sheridan-uk.com for prices - download vIvARI® brochure from www.mcdmarketing.co.uk/Corian/corian_pdf/vivari_brochure.pdf
Band 2
Other Items
Band 0
Band 1
Band 3
Band 4
168mm 500mm
352mm 413mm
317mm 168mm
413mm 352mm
150mm
£1134
The Urban sinks which have Corian® sides and a stainless steel base, are available in the colour of your choice to match or co-ordinate with your worksurface.
In order to avoid any colour variance between the top and the bowl, we suggest a bevel or moulded edge, if this is not specified, we will use our discretion as to which detail will be used.
Stainless steel bases can be susceptible to scratching.
There can be a slight variation in colour between sink and worktop. This is due to the material being thermoformed (heated and curved to a tight 10mm radius).
Mixa® Sinks R60s
(waste disposal units must be supported by a cradle)
M751 £1,978 M778 £2,526 M752 £2,236
M900 £3,043
M600 £2,848
M451 £2,104
Mixa® Sinks R10 (waste disposal units must be supported by a cradle)
M900 £3,619 M813 £1,884 M872 £3,829 M809 £1,604 M600 M778 £3,284 M853 £1,406 M767 £3,226 M451 £2,413 M851
£3,322 M871 £1,992 £1,799 M752 £2,508
£318
£318
£246
M410 £1,466 M452 £2,129 M450 £2,104
£343
£343
£266
M872 £3,167 M853 £1,178 M1050 £3,167
£405
£406
£26
M809 £1,304 M767 £2,483
M450 £2,413 M1050 £3,752 Other sinks are available, please ask our Retail Sales Department
# R60 sinks have a 60mm internal radius and are available in all but the following colours:
Clamshell, Lava Rock, Sagebrush, Aztec Gold, Sonora, Venaro White, Cinnabar which are only available in R10 or R0, Urban and Mixa Sinks are not available in disclaimer colours
Corian® & Trevino® bowls
Undermounted Bowls available in Bone, Cameo White, glacier White & vanilla
815 £402
Band 0
820 £455
Band 1 Band 2
831 £392
Band 3 Band 4
£433
£433
£333
£454
£454
£351
Pastrymate/Hot Pan Platter
£65 £128 £75
£69 £138 £80
£85 £165 £98
£88 £175 £105
£76
£151
£85
Set of 6 Stainless Steel Pan Rests (200, 300 & 400mm long) £101
Full Bowl Sink Lid
Half Bowl Sink Lid
Basket Strainer Waste £17
Phone Charger £376 Extra Support Frame (powder coated steel) per sq. mtr £268 Care & Maintenance Kit £31
DuPontTM CORIAN
®
Important points to note
Measuring up
• Corian® can expand as much as 1mm/mtr, so always allow
a gap of at least 3mm if for example, worktops are captive
between walls
• Splashbacks or upstands over 100mm high must have
a minimum gap from the face to the rear of the hob:
Electric 50mm/Gas 100mm
• Wherever possible joints in worktops should fall on a
carcass end, not in the middle, this gives added support
to a joint.
• Tolerance in Corian® solid surface is ±2mm
• Allow a min 50mm from the cutout to the front edge
• Allow min 120mm between heated cutouts (or 50mm sink cutouts)
• Plan the worktop layout to ensure joints don’t fall on or
within 100mm of cutouts.
• Stainless steel sink cut outs to manufacturer’s recommendations
• Standard overhang is 35mm from the carcass front (not the door)
• Overhangs in excess of 300mm should be supported
and worktop should be supported every 600mm
Hot Stuff
• Do not pour boiling hot water directly into solid surface
sinks, and where constant boiling hot water taps are fitted, please ensure they are not left running directly into solid surface sinks
• Heat producing appliances that sit beneath worktop, must have an aluminium foil membrane placed on the underside of worktop directly above the appliance
• Always use pan rests or trivets to avoid the risk of heat damage
• Ensure that pans used on gas hobs are of correct size
• Hob flanges need to sit on aluminium thermal insulation tape around the cut-out, to avoid conducting too much
heat and causing cracks in the worktop
Installation
• Plastering or tiling should be completed after installation • Corian® has a semi matt finish. Wiping the surface
clean will help build up a smoother patina, which helps
improve scratch and stain resistance.
• Regular use of your Care & Maintenance Kit should ensure that your worktops always looks good.
For further information Tel: 0845 618 2800 Fax: 0845 618 2824 sales@sheridan-uk.com www.sheridan-uk.com
13