Page 197 - CRESTRON HOME OS-3

Configure Horizon™ Keypads

To configure a Horizon™ keypad, select the color, button layout, button labels (engraving), and
button actions.

For additional information about keypad button presses and button modes, refer to Keypad
Button Programming (on page 875).

NOTES:

l Tap the location button to turn on the location feature for the keypad (if supported),
which may be used to locate the device in the room.
l To change the color of the LED, refer to the documentation provided with the Horizon
keypad, dimmer, or switch.
l The LEDs on the HZ-KPEX and HZ-AUX keypads are disabled by default. To enable the
LEDs, calibrate the light sensor. For details, refer to Configure the Device Settings for
Horizon Keypads (on page 707).

Select the Keypad Color

When custom-engraved keypad buttons are ordered through myCrestron, the button color is
generated automatically based on the selected color.

NOTE: Confirm that the keypad color selected with the Color tab matches the actual keypad
color before ordering custom-engraved buttons.

1. Tap the Color tab to set the keypad color.

2. Tap a color to choose the color of the selected keypad. The keypad on the left changes
color and the selected color is highlighted.

Product Manual — Doc. 8525Z Crestron Home™ OS • 197