Page 200 - CRESTRON HOME OS-3

Assign Custom Labels (Engraving) to the Keypad Buttons

NOTES:

l For more information on ordering custom labels using the myCrestron service, refer to
Configure Horizon™ Keypads (on page 197).

l The layout for the Horizon™ keypad must be set before labeling the keypad buttons.

1. Tap the Labels tab.

2. Select a button to label. The selected button is highlighted. When a single rocker button is
used, the left and right sides of the button can be labeled in addition to the center of the
button. When a large or small vertical rocker button is used, the top and bottom of the
button can be labeled in addition to the center of the button.
3. Label the button using text, icons, or icons outlined. A combination of text and icons can be
used to label each button.
l Text: Enter custom text to display on the button.
l Icons: Use the on-screen icons to display on the button. Icons are filled in with a solid
color.
l Icons Outlined: Use the on-screen icons to display on the button. Icons Outlined are
not filled in with a solid color.

NOTE: Icons and icons outlined options cannot be mixed on the same button.

200 • Crestron Home™ OS Product Manual — Doc. 8525Z