Page 340 - CRESTRON HOME OS-3

Configure a Media Scene

A media scene may be configured and tested after it has been added to the system. Use the List
of Scenes menu to select a media scene for configuration.

To configure a media scene:

1. Tap the wrench button next to the media scene name. The scene configuration screen
opens.

2. Configure the media scene:

l Source: Swipe up or down to select the media source or favorite that will be added
to the scene. Select Off to have the scene turn off all media sources for the selected
rooms.
l Rooms: Swipe up or down to select the room(s) in which the media source will be
routed when the scene is triggered. A filled check box to the left of the room name
indicates that the room is selected.

NOTE: A room must be configured as a media zone before it can be selected for a
media scene. For more information, refer to Media Scenes (on page 338).

o Select All: Selects all available rooms.
o Deselect All: Deselects all available rooms.
3. Tap Save to save any changes or Cancel to discard the changes.

340 • Crestron Home™ OS Product Manual — Doc. 8525Z