Page 344 - CRESTRON HOME OS-3

o Auto: Turns on and off the fan automatically.
o On: Turns on the fan.
o Keep Current Fan Setting : The scene does not alter the fan setting.

l Mode: Select one of the following thermostat modes:
o Off: The scene turns the thermostat off.
o Cool: The scene sets the operating mode to cool.
o Heat: The scene sets the operating mode to heat.
o Auto: The scene sets the operating mode to auto.
o Keep Current Mode: The scene does not alter the current thermostat mode.
l Adjust Setpoint(s): If this check box is selected, the scene adjusts the set points for
Heat , Cool , and Auto modes to the chosen temperature values. Select the
temperature set point for each mode from the appropriate spinner menu.
3. Tap Save to save any changes or Cancel to discard the changes.

Delete a Climate Scene

To delete a climate scene:
1. Select a room from the List of Rooms menu and then select the scene to delete.

2. Tap the trashcan button to delete the climate scene. A confirmation dialogue is shown.
3. Tap OK to delete the climate scene or Cancel to keep the climate scene.

Tap the back arrow button to return to the Setup Scenes screen.

344 • Crestron Home™ OS Product Manual — Doc. 8525Z