Page 539 - CRESTRON HOME OS-3

Add a Centralized CAEN or DIN Module

To add a centralized CAEN or DIN module, perform the following steps:

NOTE: Add Placeholder devices to the configuration to include devices that do not support
programming and third-party products. Placeholder devices are included when reports are
generated.

1. Click Add Device.
2. Select Module from the Type drop-down menu.

3. Select a module type from the Model drop-down menu. The menu is arranged by Crestron
CAEN Centralized Modules, Crestron DIN Modules, Crestron In-wall Modules, and Generic
DIN Modules.

4. Select an enclosure from the Enclosure drop-down menu and an enclosure slot from the
Slot drop-down menu.
5. Enter a name in the Name box.
6. To add the module, select + Add. To exit, select Close.

Edit a Module
Change the module information, such as the module type, room name, module name, enclosure,
and enclosure slot after the module is added to the configuration.
Edit an In-Wall Module

To edit a module, perform the following steps:
1. Select a module from the Equipment menu and then select the Settings tab.

2. Update the room and name of the module.

NOTE: The model (Module Type) cannot be changed.

3. To save the changes, select Apply.

Product Manual — Doc. 8525Z Crestron Home™ OS • 539