Page 541 - CRESTRON HOME OS-3
P. 541
l Assigned loads: Displays the total number of loads in the configuration and the number of
loads that have been assigned to modules.
l Filters:
o Loads: Displays the number of loads that match the filter criteria.
o Compatible Loads: To view only loads that are compatible with the selected module,
turn on the Compatible Loads toggle. When the Compatible Loads toggle is off, all
loads are displayed; incompatible loads are grayed out and cannot be assigned to
the module.
NOTE: The Compatible loads toggle is turned on by default.
o Text Filter: Enter text to display loads that match the text entry.
o Unassigned Loads/All Loads Drop-down: Select Unassigned Loads to view loads
that are not assigned to a module. Select All Loads to view all loads in the
configuration.
NOTE: The default setting for the Unassigned Loads/All Loads Drop-down is
Unassigned loads.
Assign Loads to In-Wall Modules
To assign a load to an in-wall module, perform the following steps:
1. Select an in-wall module from the Equipment lists and then select Assignment.
2. Select an Output assignment for the module.
3. Select a load from the Loads menu.
Product Manual — Doc. 8525Z Crestron Home™ OS • 541
