Page 570 - CRESTRON HOME OS-3

Button Mode: Lighting Load

Select Lighting Load from the Button Mode drop-down list to control a lighting load when the
button is pressed.

Affected Loads: Toggle the Enable Affected Loads to filter the load list and only display loads
that are associated with the button.

Button Behavior: The behavior defines how the lights are controlled. Select a button behavior
from the Button Behavior drop-down list:

l On/Raise/Off/Lower: Toggles the load on or off or raises or lowers the lights. The lights
turn on or off or raise or lower based on the action that was performed last. If the lights
were turned on or raised, press the button to turn the lights off or press and hold the
button to lower the lights.
l On/Raise: Turns the load on or raises the lights.
l Off/Lower: Turns the load off or lowers the lights.

Functions are assigned for the following button presses:
l Tap: Increase or decrease (jog) the light level.

l Double Tap: Turns the lights on or off without fade time.
l Press and Hold: Raise or lower the light level until the button is released or the maximum
or minimum light level is reached.

NOTE: To turn off the lights, continue holding the button after the minimum light level is
reached.

Auto Off Time: Sets a timer to turn the lights off after a set period of time. To set the Auto Off
time, select a time from the Auto Off Time drop-down list. The default auto off time is Disabled.

566 • Crestron Home™ OS Product Manual — Doc. 8525Z