Page 567 - CRESTRON HOME OS-3

Functions are assigned for the following button presses:

l Tap: Recalls or toggles the scene with the defined fade time.
l Double Tap: Immediately recalls or toggles the scene. The fade time for the scene is
bypassed.
l Press and Hold: To use the button to raise or lower the lights, select Enable Dimming for
Lights. The load raises or lowers based on the action that was performed last. If the load
was turned on or raised, press and hold the button to lower the light level. To turn off the
lights, continue holding the button after the minimum light level is reached.
Feedback Behavior: The LED feedback behavior defines the function of the LED that is
associated with the button. Select an LED feedback behavior from the Feedback drop-down list:

NOTE: For feedback purposes only, the center of a rocker button can be programmed to light
and display programmatic feedback. For example, the LED can be programmed to mimic the
function of the top button of the rocker by assigning the same settings used by the top button.

l On at Scene Level: The LED lights when the scene is recalled.

NOTE: The LED turns off if the scene is modified. For example, the LED turns off if the
lights or shades are raised or lowered.

l On When any Light On: The LED lights when any lighting load that is associated with the
scene is on. For example, if a keypad button recalls the All On scene from the Whole House
room, the LED lights when any light in the house is on and the LED turns off when all lights
in the house are off.

Enable Dimming for Lights: When Enable Dimming for Lights is enabled, press and hold the
button to raise or lower the lights. If the last action performed raised the lights, the lights will be
lowered.

Enable Time of Day Actions: Assign a different action for each time of day. Tap the Morning,
Day, Evening, or Night button and then select the action.
Enable Programmatic Feedback:When enabled, the LED provides feedback based on the status
of other devices in the Crestron Home system. This allows the LED to light when another keypad
in the system recalls the same action (for example, a different keypad recalls the same scene).
When disabled, the LED provides no feedback.

Product Manual — Doc. 8525Z Crestron Home™ OS • 563