Page 668 - CRESTRON HOME OS-3

l IP ADDRESS / HOST NAME: The Host name is entered by the system during
discovery.
REMOTE ACCESS SETTINGS:

NOTE: To configure the system for remote access (outside of the home using a
cellular network), refer to Remote System Access (on page 517).

l IP address / Host name: Enter the IP address or the Host name of the Crestron
Home processor to enable remote access.
l Port: Enter the port to access the system. The default port is 50001.
l Local Port: If the port for the user interface was changed during setup, enter the
port in this field. The port number should only be changed if port 50001 is in use by
the ISP and cannot be forwarded. For details, refer to System Detail & Password
Configuration (on page 273).

NOTE: Only change the Local Port when directed by your authorized Crestron
dealer.

7. Tap Connect to add the iOS device or Android device to the Crestron Home system. If the
information is valid, the My Homes screen is displayed.

Product Manual — Doc. 8525Z Crestron Home™ OS • 651