Page 669 - CRESTRON HOME OS-3

Pair a TSW-xx60 Series Touch Screen

NOTES:

l The Crestron Home app runs on the TSW-xx60 series touch screen and must be enabled
within the device.
l The TSW-xx60 series touch screen must be using firmware version 2.05.xx or higher. To
upgrade the firmware, refer to Update Device Firmware (on page 322).

Enable the Crestron Home app on the TSW-xx60 Series Touch Screen:
1. Enter the TSW-xx60 settings. The TSW-xx60 settings can be accessed from the touch
screen or from a PC connected to the TSW-xx60's web page.
a. From the TSW-xx60:

i. Place five fingers on the display and hold for 15 seconds.
ii. Tap Application Selection to bring up the Application Selection screen.

iii. Tap Crestron Home.
iv. Tap Confirm Selection. The touch screen reboots with the Crestron Home
application running and then displays the landing page.

b. From the TSW-xx60's Web Page:
i. Enter the IP address or host name of the touch screen into a web browser.
ii. Click Settings and then Applications.
iii. Select Crestron Home from the Application Mode drop-down.
iv. Click Save Changes. A pop-up dialog is displayed stating that the touch screen
must be rebooted for the new application to take effect. Click Yes to reboot
the touch screen now or No to reboot the touch screen later. The touch screen
reboots with the Crestron Home application running and then displays the
landing page.

652 • Crestron Home™ OS Product Manual — Doc. 8525Z