Page 740 - CRESTRON HOME OS-3

Set the Curve Type:

l Linear: Dim the load using a linear dimming curve.
l Logarithmic: Dim the load using a logarithmic dimming curve.
l Custom: Dim the load using a custom dimming curve. Create the dimming curve using
Crestron Toolbox™ software.
Tap the Load Type tab to match the type of load that is connected to the dimmer.

Set the Load Type:
l Local Settings: Dims the load using the dimming mode set locally on the dimmer.

l Auto: Dims the load using forward or reverse phase dimming. The dimmer selects the best
dimming mode based on the type of load that is attached.
l Reverse: Dims the load using reverse phase dimming (trailing-edge dimming). Typically
used with incandescent, dimmable LED, or electronic low-voltage (ELV) loads.
l Forward: Dims the load using forward phase dimming (leading-edge). Typically used with
magnetic low-voltage (MLV) loads.
l Non Dim: The load type is not dimmable. The dimmer functions a switch and toggles the
load between full on (100%) and full off (0%). Ramp and fade times are ignored.
Overrides the functionality set on the dimmer.

Product Manual — Doc. 8525Z Crestron Home™ OS • 723