Page 743 - CRESTRON HOME OS-3

Tap the Min/Max tab to configure the minimum and maximum dimmer level.

Set the Dimmer Min Level and Dimmer Max Level:
l Dimmer Min Level: The lowest level that the lights will dim to. This may help prevent
flickering at low levels.
l Dimmer Max Level: The highest level that the lights will raise to. This will prevent the lights
from being too bright in the room when at full brightness.
Tap the Curve Type tab to configure the curve type that is used to dim the load. Select Linear or
Logarithmic based on the load type.

726 • Crestron Home™ OS Product Manual — Doc. 8525Z