Page 762 - CRESTRON HOME OS-3

l Configure the Digital Input(s):

1. Tap the gear button next to the Opened digital input. The Opened Hardware
Connection dialog appears.
2. Select the digital input (VersiPort) number that is monitoring the open state of the
garage door.
3. Select Contacts Are Open or Contacts Are Closed to select the state of the sensor
contacts when the garage door is opened or closed.

NOTE: If 1 Digital Input is selected in Operation Mode, select the state (Opened or
Closed) that the sensor is monitoring.

4. Select the check box next to Enable Pull-Up Resistor to enable the pull-up resistor.
5. Tap OK.

6. Repeat steps 1 and 2 for the Closed digital input.

Product Manual — Doc. 8525Z Crestron Home™ OS • 745