Page 804 - CRESTRON HOME OS-3
P. 804
Tap the Setup tab to configure the cable box power settings.
l Power Up Time (seconds): The amount of time that must pass between turning on the
device and selecting an input. The value can be set between 1 and 600 seconds.
Unexpected functionality may occur if the value is set too low.
l Power Down Time (seconds): The amount of time that must pass between turning off the
device and turning it back on. The value can be set between 1 and 600 seconds.
Unexpected functionality may occur if the value is set too low.
l Reset to Defaults: Sets the fields in the Setup tab to their default values.
Product Manual — Doc. 8525Z Crestron Home™ OS • 787
