Page 815 - CRESTRON HOME OS-3

Interrupt Settings

Use the Interrupts tab to enable, disable, and configure the interrupts for a device.

An interrupt is a notification from the Crestron Home system that informs the user that an
event has occurred. When an interrupt event occurs, a message describing the event is displayed
on the user interface devices (TSW-xx60 series touch screens, iOS® devices, and Android™
devices) in the home. Additionally, audio that is playing in the room may be momentarily muted
and a chime can be played.
Interrupts are supported by the following devices:

Device Type Enabled/Disabled (Default) Event

Burglary Alarm Enabled Burglary alarm is activated
Doorbell Enabled Doorbell is activated
Door Lock Enabled Door is unlocked

Door Sensor Disabled Door is opened
Driveway Sensor Enabled Driveway sensor is activated

Garage Door Disabled Garage door is opened
Gate Disabled Gate is opened
Occupancy Sensor Disabled Occupancy sensor is activated

Security System Enabled (for alarm events) Security system event is activated
Smoke Alarm Enabled Smoke alarm is activated

Water Alarm Enabled Water alarm is activated
Window Alarm Enabled Window alarm is activated

NOTES:
l There is no interrupt when occupancy is detected by the Grace Occupancy feature on a
Crestron occupancy sensor.
l Devices that are paired with the Crestron Home system prior to the introduction of the
interrupts feature will have their interrupt enabled or disabled according to the list
above. For example, the interrupt for a Smoke Alarm will be enabled when the system is
updated.

798 • Crestron Home™ OS Product Manual — Doc. 8525Z