Page 852 - CRESTRON HOME OS-3

o Wired light load performance when controlling Lutron loads via Crestron Home
keypad programming and Scenes:
n Loads are controlled in the order that the cabinet is wired.
n There is a 0.1 second delay between each load that is controlled.

n Twenty loads in a cabinet can be controlled in approximately 1 to 2 seconds.
n Loads in multiple cabinets are controlled one cabinet at a time. For example, if
there are two cabinets installed, loads in Cabinet A are controlled and then
loads in Cabinet B are controlled.
o Wireless light load performance when controlling Lutron loads via Crestron Home
keypad programming and Scenes:
n There is a small delay (about 0.8 seconds) between each light load that is
controlled.
n Controlling five wireless lights will take about 4.5 seconds.
n Controlling 27 wireless lights will take about 17 seconds.

o Wired and wireless shade load performance when controlling Lutron loads via
Crestron Home keypad programming and Scenes:

n There is a small delay between each shade load that is controlled.
n When controlling 20 shades, there will be a 1- to 3-second lag between when
the first shade starts moving and the last shade starts moving.
l To emulate a Lutron button and a function within Crestron Home (for example, a Crestron
Home scene), create a sequence that recalls the Lutron button and the Crestron Home
function. For details, refer to Mode: Sequence (on page 143).
l Lutron loads can be included in a Quick Action when Scene or Sequence is selected from
the Mode drop-down menu.

o To control the Lutron load when Scene is selected from the drop-down menu, create
a scene that includes the Lutron load and then select the scene when configuring the
Quick Action. For details, refer to Step 4: Create Scenes (on page 114) and Mode:
Scene (on page 139).
o To control a Lutron load when Sequence is selected from the drop-down menu, add
the Lutron load to the sequence and then configure it. For details, refer to Mode:
Sequence (on page 143).
l Lutron shades will be excluded from Crestron Home shade groups. Lutron shade groups
should be setup in the Lutron Designer software. Crestron Home will create shade loads
for Lutron shade groups, and ungrouped shades.

Product Manual — Doc. 8525Z Crestron Home™ OS • 835