Page 908 - CRESTRON HOME OS-3

3. Set the Passwords: Set up the Advanced User password and User Interface Device
password. For details, refer to System Detail & Password Configuration (on page 273).
Configure the TSW-xx60 Series Touch Screen

The TSW-xx60 series touch screen must be configured to use a static IP address, use the latest
firmware, run the Crestron Home app, and be added to the Crestron Home system.

l Assign a Static IP: Refer to the TSW-xx60 series touch screen product manual (Doc. 7927)
at www.crestron.com/docs/7927 or the Crestron Toolbox™ Software help file.
l Upgrade the Firmware: Refer to the TSW-xx60 series touch screen product manual (Doc.
7927) at www.crestron.com/docs/7927 or the Crestron Toolbox™ Software help file.

l Launch the Crestron Home App and Pair the Touch Screen: Refer to Pair a TSW-xx60
Series Touch Screen (on page 652).

Configure the CAME Door Station Cameras
Connect the CAME BTP MTMV/IP and DVC/IP door stations to a network switch and supply
PoE+ (Power-over-Ethernet). The door stations are configured using a Web interface.
On the initial power up of the CAME Door Station, the Default IP address is 192.168.1.5 with
Netmask 255.255.255.0. To access the Door Station Camera, connect the camera to a PoE
switch along with a laptop which is assigned an IP address on the same subnet of the Door
Stations default IP.

CAME Door Station – Default IP

Product Manual — Doc. 8525Z Crestron Home™ OS • 891