Page 936 - CRESTRON HOME OS-3
P. 936
CAME Door Station
Configure CAME door stations to communicate with a Crestron Home processor and TSW-xx60
series touch screens. The TSW-xx60 series touch screens register to the primary CAME door
station as SIP users. The primary CAME door station acts as a mini server (primary) and allows
the secondary CAME door station to register to it.
Overview
The network topology for the Crestron Home processor and TSW-xx60 series touch screens to
interop with the CAME door stations is shown below.
The system was tested using the following components:
l Crestron Home processor (version 2.4362.12407)
l (3) Crestron TSW-xx60 series touch screen (version 2.7.60)
l Crestron Toolbox™ software
l CAME MTMV/IP Door Station (Primary) (version 2.5.3)
l CAME DVC/IP Door Station (Secondary) (version 2.5.3)
l PCS/XIP Design Tool Software (version 6.1.4)
NOTE: A computer is required to use Crestron Toolbox™ software and the PCS/XIP Design Tool
software.
Summary
The Video Door Entry system is a serverless system. The primary MTMV/IP door station acts as
the server where the PCS/XIP designs and configures the system. The MTMV/IP and DVC/IP
door stations provide audio and video over Ethernet to the Crestron TSW-xx60 series touch
screens. The SIP devices can be connected using PoE Ethernet connections.
Product Manual — Doc. 8525Z Crestron Home™ OS • 919
