Page 937 - CRESTRON HOME OS-3
P. 937

The Crestron Home processor connects to the touch screens and uploads the Crestron Home
               User Interface onto the touch screen.
               Features Supported

                    l Audio and video from the CAME door stations
                    l Audio only from the TSW-xx60 series touch screen
                    l Calls from CAME door station to TSW-xx60 series touch screen

                    l Basic calls with G711ulaw codec
                    l Video using 103 H264/90000

               Features Not Supported
                    l CAME door stations do not have a video display. Video from the TSW-xx60 series touch
                     screens to the CAME door stations is not supported.
                    l Calls from TSW-xx60 series touch screens to the CAME door stations
                    l Calls from TSW-xx60 series touch screens to other touch screens

               Known Issues and Limitations
               None

               Setup

               The Crestron Home processor, TSW-xx60 series touch screens, and CAME door stations must be
               properly configured. All Ethernet devices must be assigned a static IP address and be on the
               same subnet.
               Configure the Crestron Home Processor

               The Crestron Home processor must be fully set up and configured prior to setting up the CAME
               door stations. Additionally, a static IP address, Advanced User password, and User Interface
               Device password must be set.


               NOTES:
                    l Use the Device Discovery Tool that is available in Crestron Toolbox™ Software to obtain
                     the IP address of the Crestron Home processor.
                    l The CP4-R was assigned Static IP address 10.64.5.90 for the test.

                   1.  Set up the Crestron Home System: Set up and configure the Crestron Home system. For
                     details, refer to Configure a Crestron Home™ System (on page 29).
                   2.  Assign an IP Address: Assign a static IP address. For details, refer to Ethernet Settings (on
                     page 279).
                   3.  Set the Passwords: Set up the Advanced User password and User Interface Device
                     password. For details, refer to System Detail & Password Configuration (on page 273).
               Configure the TSW-xx60 Series Touch Screen

               The TSW-xx60 series touch screen must be configured to use a static IP address, use the latest
               firmware, run the Crestron Home app, and be added to the Crestron Home system.



                920 • Crestron Home™ OS                                              Product Manual — Doc. 8525Z
   932   933   934   935   936   937   938   939   940   941   942