Page 99 - CRESTRON HOME OS-3

Configure CEC Devices
To configure source routes for CEC devices, perform the following steps:

l Connect the CEC device to one of the following devices that provide CEC control:
o DM Switchers (for example, the DM-MD8X8 or DM-MD16X16)
o DM-NVX Devices (for example, the DM-NVX-351 and DM-NVX-360)

o AV Switchers (for example, the HD-MD4x1-4KZ-E and HD-MD8X4-4KZ-E)

NOTE: The Crestron Driver based AV Switchers (HD-MD4X1-4K-E,
HD-MD4X2-4K-E, and HD-MD6X2-4K-E) do not provide CEC control.

l Select the Control Point on the device settings screen. The CEC device must be connected
to the control point that is selected.
In the illustration that follows, the Control Point selected for the Chromecast Ultra is Input
1 on the DM-NVX-351C located in the Equipment room.

Product Manual — Doc. 8525Z Crestron Home™ OS • 99