Page 141 - Select Specialty

Oil-Less Claw Medical Vacuum

Appendix B: Variable Speed Drive Inverter

B.1.1 Monitoring of Output Current and Output Voltage

The monitor display of output frequency, output current and output voltage can be changed by pushing
“SET” button during monitor mode. The default is set to display output frequency. To change the
default, press “SET” button to display either A (amps) or V (voltage). Press and hold the “SET” button for
1 second to activate teh selected display as the default.

B.2 Specifi cations

B.2.1 Display and Parameter Settings

All parameter settings can be displayed from the display monitor. For a complete list of parameters,
description and settings, see Parameter List in Section B.2.2. Parameter settings are write protected to
maintain factory settings.

Display Paramater Number & Setting

1. Press the “MODE” button to activate parameter setting mode.

2. Turn the setting dial to the parameter number to be displayed.

3. Press the “SET” button to display the value of the parameter.

4. Press the “MODE” button twice to return to the monitor display

4107 9000 95.04 B-2